Grindmaster-Logo

B-ID

PrecisionBrew™ Digital Decanter/Airpot Brewers

  • Model B-ID is a single, digitally controlled brewer that brews into a 1.9L (64oz.) stainless steel vacuum insulated decanter (decanter sold separately).
  • The vacuum insulated, stainless steel decanters model SS-1.9LR (regular) and SS1.9LD (decaf) hold freshly brewed coffee for hours without additional heat.
  • Precise Brew Temperature – The brewer will hold the brew temperature to +/- 1°F during the complete brew cycle.
  • Brew Volume – Can be set by ‘teach’ mode to eliminate trial-and-error set-up.
  • Pulse brewing/pre-infusion – Allows the brew sequence to extract up to 20% more dissolved solids per batch of coffee.  Programmable: number of pulses, pulse-on time and pulse-off time.  Changing the pulse sequence does not affect the brew volume.
  • Low Temp/No Brew – Allows the brew cycle to begin only when the water has reached the optimum brew temperature.
  • Cycle Counter – The brewer counts the total number of brew cycles.
  • Programming Lock-Out – The brewer settings can be “locked” to prevent tampering.
  • Pour-Over Capability – Automatically converts to pour-over mode when the inlet valve does not sense water.  Also capable of being manually set to pour-over mode through the front.
  • Dual Voltage with toggle switch models are available to accept 120/240V or 120V supply
  • Model B-ID-120V has a plastic brew basket.
  • Warranty – 2 years parts and labor on the brewer.  4 years part warranty on the control board.
No document available .

Teddy-Pdf